
How to Source Toys and Children's Products from China Safely
Toys carry safety standards on both sides of the border β China's GB 6675 and CCC, America's ASTM F963 and CPC, Europe's EN 71 and CE. Here is the compliance map before you ship a single unit.
Toys are the most compliance-heavy product a buyer can source from China. A plush bear or a plastic truck that is fine at the factory gate still has to satisfy three regulators β China's, the destination country's, and the platform or retailer's β and a single failed lab test or a missing certificate can trigger a recall that costs more than the whole order. This guide lays out the standards on each side of the border so you know exactly what to ask the supplier for before a single unit ships.
China's baseline: the GB 6675 series
Inside China, toy safety is governed by the mandatory GB 6675 series. GB 6675.1-2014 covers basic requirements, GB 6675.2-2014 mechanical and physical properties, GB 6675.3-2014 flammability, and GB 6675.4-2014 migration of specific elements. One timing point matters for anyone sourcing now: a new GB 6675.1β6675.4-2025 series was published on 5 October 2025 and takes effect on 1 November 2026, replacing the 2014 editions. As of 13 October 2026 the 2014 versions are still current, but a shipment that clears in November must meet the 2025 editions β confirm which version applies at the date of production and import.
The CCC mandatory certification for toys
Separate from the GB standard is the China Compulsory Certification (CCC) administered by CNCA. The current children's-product CCC categories are three: child-vehicle products (2201), toys (2202), and child restraint systems for motor vehicles (2207). Within the toys category, the products that require CCC are electric toys, plastic toys, metal toys, and ride-on vehicle toys. Two older labels have been folded into this scheme β doll toys now sit inside the plastic-toy category, and projectile toys are classified by material into plastic or metal β so the practical rule is simpler than older sourcing guides suggest.
- In CCC scope: electric toys, plastic toys, metal toys and ride-on vehicle toys (category 2202).
- Out of CCC scope: non-electric paper, bamboo-and-wood, plush/fabric, ceramic, glass and plaster toys, plus mouth-activated and water/inflatable toys.
- A product already CCC-certified under the 2014 standards must complete its switch to the 2025 standards by 31 October 2027.
Exporting to the United States: ASTM F963 and the CPC
For the US market the operative standard is ASTM F963. The current edition, ASTM F963-23, became a mandatory federal toy safety standard on 20 April 2024 under CPSIA section 106 and was incorporated into 16 CFR Part 1250. A toy intended for children 12 and under must be tested by a CPSC-accredited third-party laboratory, and the importer or manufacturer must issue a Children's Product Certificate (CPC) under CPSIA sections 102 and 14. Separately, CPSIA section 103 requires a permanent tracking label on the product and its packaging stating the manufacturer or importer, place and date of production, and batch or run number β the CPC and the tracking label are two different obligations, and both are checked at the border.
Exporting to the EU: EN 71 and CE marking
For the EU, the Toy Safety Directive 2009/48/EC governs toys intended for children under 14. It requires a CE mark, a technical file and a declaration of conformity, with conformity demonstrated against the EN 71 series (EN 71-1 mechanical and physical, EN 71-2 flammability, EN 71-3 migration of specific elements, and others) plus EN 62115 for electric toys. A forward-looking note is worth adding to any long-term sourcing plan: Directive 2009/48/EC will be replaced by the EU Toy Safety Regulation (EU) 2025/2509 from 1 August 2030, so suppliers should be asked which framework their certificates target.
What China itself now requires of toy exporters
The old export-facing licensing has been dismantled, and old advice here is now wrong. The export toy quality licence was abolished in 2015, and the statutory inspection of exported toys (export commodity inspection) was abolished from 1 September 2016. Today an exporter does not need a special export licence or mandatory export commodity inspection. What remains is a system of enterprise self-inspection and control plus customs random inspection and key-category supervision: the exporter must maintain its own quality-safety control and traceability system, and customs may sample goods at random. The compliance burden has shifted to meeting the destination market's entry rules, not to a Chinese export permit.
For any toy, request the CCC certificate (China), the CPC with its CPSC-accredited lab report (US), or the CE declaration of conformity with the EN 71 test report (EU) β and check the certificate number against the issuing body's database rather than accepting the PDF the supplier sent. Confirm which GB 6675 edition applies to your production date, and which EU framework (the directive or the 2025 regulation) the CE paperwork references.
Toys reward the buyer who reads the standards before reading the price list. Match the product to the right certificate in China, the right lab report in the destination market, and the right edition of the underlying standard, and a recall becomes an unlikely event instead of a probable one. This content is general information and not legal advice; confirm the current standards, certification catalogues and timelines with the official authorities in each market before purchasing.
Related guides
Verify a supplier now
Run due diligence on a Chinese supplier before you pay.
