
Sourcing Packaging and Printed Materials from China: Food-Contact and Recycling Rules
Packaging is a product in its own right, and the rules move on a schedule: China's GB 4806 series for food contact, the EU's 1935/2004 framework, recycled-plastic rules under (EU) 2022/1616 and the PPWR from August 2026.
Packaging looks like a cost line, but in law it is a product in its own right β and for anything that touches food, cosmetics or anything a child might mouth, it is one of the most tightly specified products you will ever buy. The box, the film, the ink and the adhesive all have their own standards, and the standards have been moving: China's food-contact series, the EU's framework regulation, a specific new rule for recycled plastics, and a packaging-waste regulation that starts to bite in 2026. A buyer who treats packaging as an afterthought to the main product ends up re-specifying, re-testing and re-printing β and the re-print is usually the most expensive version of the order. The way to buy packaging from China is to name the standard, the material grade and the effective date in the purchase order, and to know which of the moving rules apply to your market.
Food-contact materials: China's GB 4806 series
For packaging and utensils that touch food, China's national standards are the GB 4806 series β the general safety requirements in GB 4806.1 and the material-specific standards (plastics, paper, metals, ceramics, coatings and rubbers) that follow it. The series sets requirements on the migration of hazardous substances into food, so the meaningful evidence is a migration test report, not a statement that the material is "food grade". The series is updated piece by piece, so the purchase order should name the specific sub-standard and its current effective version β a report against a superseded version does not prove current compliance. For a buyer shipping the same packaging to multiple markets, the Chinese domestic standard is a baseline, not the ceiling, because the destination market may set tighter limits.
The EU baseline: Regulation (EC) No 1935/2004
For the European Union, the framework for food-contact materials is Regulation (EC) No 1935/2004, which requires that materials not transfer their constituents into food in quantities that endanger health or change the food, and it is underpinned by good manufacturing practice. In practice a compliant supply chain produces a Declaration of Compliance (DoC) for each food-contact material, supported by migration testing β and the DoC is only as good as the test data behind it. Buyers should require the DoC from the packaging converter and keep the underlying test report, because that is what a border authority or a customer will ask for first.
Recycled plastics: it is (EU) 2022/1616, not the old number
One correction that saves real money: the EU rule governing recycled plastic food-contact materials is Commission Regulation (EU) 2022/1616, which repealed the older Regulation (EC) No 282/2008. A spec that still cites 282/2008 is out of date and will be rejected or questioned. Note also that (EU) 2025/40 is a different instrument entirely β it is the packaging and packaging waste regulation, not the recycled-plastics rule β so the two should not be conflated in a purchase order. For recycled-content packaging, cite (EU) 2022/1616 and confirm the recycler's authorisation and the applicable decontamination requirements against the current text.
Packaging waste: the PPWR applies from August 2026
For packaging placed on the EU market, Regulation (EU) 2025/40 β the Packaging and Packaging Waste Regulation β entered into force in February 2025 and applies from 12 August 2026, repealing the old Directive 94/62/EC. It drives recyclability, recycled-content minimums, marking and labelling and the reduction of over-packaging. The practical consequence for a China sourcing programme is that packaging specified in 2025 may be non-compliant when it reaches the EU in late 2026, so buyers should spec against the PPWR's recyclability and recycled-content requirements now rather than after the deadline. The date to write into the purchase order is 12 August 2026.
Inks, marks and barcodes
- Printing inks for food-contact packaging are governed in the EU by the good-manufacturing-practice framework, Regulation (EC) No 2023/2006, plus member-state rules β there is no single harmonised EU positive list for inks, so confirm the destination country's position.
- Barcodes should be GS1-allocated and correctly encoded, because a misprinted or misallocated code fails at the retailer's gate rather than the border.
- Printed marks, logos and artwork should be cleared for trademark and design conflicts in each destination market before the plates are made β re-plating is the most expensive typo in packaging.
Four references carry a packaging programme: GB 4806 (China food-contact), Regulation (EC) No 1935/2004 (EU framework), Regulation (EU) 2022/1616 (recycled plastics β not the old 282/2008), and Regulation (EU) 2025/40 (packaging waste, applying from 12 August 2026). Name the standard, the material grade and the effective date, and keep the test report behind every declaration.
Packaging is where a cheap spec becomes an expensive re-print, and the difference is usually a standard version or an effective date nobody checked. Name the right GB 4806 sub-standard, cite 2022/1616 for recycled plastic, and spec against the PPWR before August 2026, and the packaging clears with the product inside it. This content is general information and not legal or technical advice; confirm the current standards and dates with the relevant authorities and a qualified testing laboratory.
Related guides
Verify a supplier now
Run due diligence on a Chinese supplier before you pay.
