
Sourcing Batteries and Energy Storage from China: Verification and Compliance
A lithium battery is a regulated, hazardous and heavily certified product. The certifications, transport rules and supplier checks that decide whether a battery order is safe, legal and actually shippable.
Batteries sit at the intersection of three hard problems in China sourcing: they are regulated, they are hazardous, and their quality is almost impossible to judge from a spec sheet. A lithium battery that fails is not a cosmetic defect β it is a fire risk, a recall, a shipment rejected by the carrier and, potentially, a product-liability claim. At the same time the battery supply chain is full of trading companies that buy cells from someone else, relabel them and sell them as their own, so the single most important verification question in battery sourcing is whose cells are actually inside the pack and whether the paperwork matches them. On top of that, the regulatory environment has tightened: the European Union's Battery Regulation (EU) 2023/1542 entered into force on 17 August 2023 and phases in requirements including carbon-footprint declarations, recycled-content thresholds and due-diligence obligations, while transport rules such as UN38.3 and the dangerous-goods framework apply from the moment the goods move. This guide walks through the certifications a buyer must collect, the transport rules that decide whether the goods can even ship, and the supplier checks that separate a genuine manufacturer from a relabeller.
The certifications and documents a buyer must collect
- UN38.3 β the transport-safety test under the UN Manual of Tests and Criteria (Section 38.3) that lithium cells and batteries must pass before air or sea shipment; the test summary (test summary per the UN Model Regulations) must be provided for transport and is requested by carriers, forwarders and marketplaces alike.
- MSDS / SDS β the safety data sheet for the cell or battery, which must match the exact model and chemistry being shipped, not a generic lithium-ion sheet.
- IEC 62133 or UL equivalents β safety standards for cells and packs (IEC 62133-2 for lithium systems, UL 1642 / UL 2054 in the US context), demonstrating the product passed electrical and mechanical safety testing.
- CB test report and certificate β the IECEE CB scheme report that underlies many national certifications and shows which laboratory tested which model.
- CE, UKCA and FCC where applicable β CE marking under the relevant directives (including, for many electronics, the EMC and low-voltage directives and, for radio, the Radio Equipment Directive) and FCC Part 15 for devices with radio functions.
- EU Battery Regulation documentation β as the phases of Regulation (EU) 2023/1542 come into effect, carbon-footprint declarations, the battery passport and supply-chain due-diligence evidence for the relevant categories.
- Cell-level certification versus pack-level β the certificates must cover the actual cells and pack you are buying; a certificate for a different cell or a prototype is not compliance for the production run.
Transport: the part that decides whether the goods ship at all
Lithium batteries are dangerous goods, and that single fact controls the entire logistics chain. Cells and batteries must be packed, marked, labelled and documented to the applicable mode β the IATA Dangerous Goods Regulations for air and the IMDG Code for sea β and they must be accompanied by the UN38.3 test summary, the dangerous-goods declaration and the carrier's own battery-shipping requirements. State of charge limits for air transport, watt-hour rating thresholds, and packaging performance tests (UN specification packaging) all apply, and a shipment that arrives at the airport or port without the right paperwork will simply not move β or worse, will move and then be stopped. The practical consequence for a buyer is that battery logistics has to be planned with a forwarder that genuinely handles dangerous goods, and the supplier's transport documents must be checked as carefully as the product certificates. A common failure is a supplier that quotes 'DDP to your door' for batteries without a dangerous-goods-capable forwarder, and the buyer only discovers the problem when the goods are held.
Verifying the supplier: manufacturer or relabeller?
- Confirm the cell manufacturer β the most important question is which company actually made the cells (CATL, EVE, REPT, Gotion and similar, or a second-tier maker), and whether the name on the pack is the name of the maker.
- Match the certificates to the cells β the UN38.3 report, the IEC 62133 report and the MSDS must name the same cell model and chemistry that are actually inside your pack.
- Check the factory, not just the trader β verify whether your supplier operates the production line or is a trading company relabelling another maker's cells, and adjust the quality-control plan accordingly.
- Trace the cell batch β ask for batch codes and the cell-level test data (capacity, internal resistance, cycle data) for your production run, not a sample from a year ago.
- Confirm the BMS and pack design β for packs, the battery management system and the assembly are where quality failures concentrate, so verify the BMS supplier and the pack-level safety testing.
- Test independently β commission your own UN38.3-adjacent verification or a pre-shipment inspection and independent capacity testing on samples you control, because supplied battery reports are among the most recycled documents in China sourcing.
The compliance timeline to build into the order
- Lock the cell model and pack spec first β every certificate downstream depends on the exact cell, chemistry and watt-hour rating.
- Collect and verify the certificates before payment β UN38.3 test summary, IEC 62133 or equivalent, MSDS, and any CE/FCC documentation, each matched to the exact model.
- Plan dangerous-goods logistics up front β book a forwarder that handles IATA/IMDG battery shipments and get the packing, labelling and declaration requirements before the goods are made.
- Add a pre-shipment inspection with capacity testing β sample the finished packs, check the cell batch and test capacity on units you control.
- Track the EU Battery Regulation phase-ins β carbon-footprint declarations, the battery passport and due-diligence obligations apply to the relevant categories on the official timeline, so build them in before they bite.
The question that matters most is the one the spec sheet never answers: whose cells are actually in the pack? Ask for the cell manufacturer's name and the cell-level UN38.3 and IEC 62133 reports, and refuse any order where the certificates name a different cell than the one inside. A battery is one of the few products where a forged or recycled certificate can mean a fire, a rejected shipment and a recall β so verify the cell, verify the paperwork, and test the goods yourself before they leave China.
Battery sourcing rewards the buyer who treats it as a compliance exercise rather than a purchase. Lock the cell model, collect and verify the UN38.3, IEC 62133 and MSDS documentation, plan dangerous-goods logistics with a capable forwarder, and commission your own testing before shipment. For the certificate framework that applies across product categories, see our guide to China product compliance certificates (CE, RoHS, REACH and FCC), and for the broader electronics routine, our electronics sourcing checklist. A battery order done right is legal, shippable and defensible; done wrong, it can be none of the three. This content is general information and not legal advice.
Related guides
Verify a supplier now
Run due diligence on a Chinese supplier before you pay.
