Iflawyer
Ask a Lawyer
…
← All guidesΒ·Verification10 min read2026-10-27
Sourcing custom machinery from China and verifying fabrication

Sourcing Custom Machinery from China: Verifying Who Actually Builds It

A custom machine is paid for in stages and can only be verified by watching it be fabricated β€” which is exactly what a trading company reselling someone else's machine does not want you to do. How to confirm the factory, run a FAT and tie payments to fabrication evidence.

Custom machinery is the highest-stakes order a buyer places in China, and the one where the gap between the seller and the real manufacturer is widest. A custom machine is built to your specifications, paid for in stages, and can only be verified by watching it be fabricated β€” which is exactly what a trading company reselling someone else's machine does not want you to do. The buyer who is sold a 'factory-direct' custom machine but actually buys a resold or half-built one discovers the problem when the machine arrives late, mismatched or not at all. This guide is about the verification that separates a factory actually fabricating your machine from a middleman taking your deposit.

The core question: who is actually building it?

The single most important question in custom machinery sourcing is whether your counterparty operates the fabrication line or is a trading company. The answer changes everything downstream β€” pricing, lead time, responsibility for defects and the value of every guarantee you are given. A trading company can still deliver a good machine if it has a real relationship with a real factory, but the risk profile is different, and the verification has to trace through the trading company to the floor that welds, machines and assembles. Ask for the factory's business licence, its physical address and the name of the actual production site, and check that they line up with who you are paying.

Verifying fabrication, not just the quotation

  • Walk the floor, virtually at least. A factory that is actually building your machine can show you the frame being welded, the parts being machined and the assembly bay β€” on a live video call, with your job number visible.
  • Match the drawings to the work. Send your drawings and require the factory to confirm, in writing, the revision they are building against, and check the parts on the floor against those drawings.
  • Pin down who holds the fabrication. Ask whether any sub-process β€” welding, machining, controls β€” is outsourced, and to whom, because the guarantee is only as good as the weakest sub-supplier.
  • Check the tooling and fixtures. A genuine fabricator has jigs, fixtures and tooling specific to your machine; a reseller has a catalogue.

FAT: the factory acceptance test that proves it works

A custom machine is not finished when it looks assembled; it is finished when it passes a factory acceptance test (FAT). The FAT is the moment to verify that the machine does what the specification says: run it with your material or a representative sample, measure the output, and record the results against the agreed acceptance criteria. A machine that has not been tested at the factory will be tested for the first time on your floor, where every defect is a freight bill and a production stoppage. Put the FAT criteria in the contract, attend it yourself or send an inspector, and do not release the final payment until the FAT is passed and documented.

Payment milestones that track fabrication

  1. Tie each payment to a visible fabrication milestone β€” deposit on confirmation of drawings, a stage payment when the frame or core is demonstrably built, another at FAT, and the balance on delivery and commissioning.
  2. Get photographic and video evidence at each milestone β€” dated, with your job number and the machine in frame, not a stock photo.
  3. Hold back enough to matter β€” a balance large enough that walking away is more expensive than finishing the machine properly.
  4. Put the schedule in writing β€” a dated production plan with named milestones, so a slip is a breach, not a phone call.

Red flags that you are buying from a middleman

  • The factory address is a trading office or a shared virtual address, and the production site is never shown.
  • Photographs are recycled, or the 'your machine' photos show a machine that is visibly different from your drawings.
  • Every question about fabrication is answered with 'the factory will handle it' β€” without naming the factory.
  • The price and lead time are suspiciously low, and the supplier wants the full deposit before any fabrication evidence exists.
πŸ’‘ The tell

The phrase that separates a fabricator from a middleman is a live video walk of the floor with your job visible. A factory actually building your machine can show you the frame, the machined parts and the assembly bay on a call, with your job number in the frame, and can point a camera at the machine that is yours. A trading company stalls, changes the subject, or shows you photos. If the supplier cannot show you your machine being built, treat the order as unverified β€” and tie the money to evidence of fabrication, not to promises.

Custom machinery rewards the buyer who verifies fabrication at every stage β€” who confirms the factory, matches the work to the drawings, runs a FAT before shipment and ties every payment to visible progress. The buyers who lose money are the ones who fund a machine they have never seen being built. Watch the floor, test the machine, and release the money only against evidence. This content is general information and not legal advice.

This guide is general information for overseas buyers and is not legal advice. For a specific transaction or dispute, consult a qualified lawyer licensed in the relevant jurisdiction.

Verify a supplier now

Run due diligence on a Chinese supplier before you pay.

Verify now
βš–οΈLawyerπŸ€–AI Expertβœ‰οΈEmailinfo@iflawyer.com