Iflawyer
Ask a Lawyer
…
← All guidesΒ·Legal Rights9 min read2026-10-22
China supplier quality agreement clauses

China Supplier Quality Agreement (QAA): The Clauses That Protect You

The purchase order sets the price; the quality agreement sets the standard. AQL levels, inspection and notice under the Civil Code, the golden sample, and the clauses a buyer actually needs.

A purchase order with a Chinese supplier usually says what, how many and how much β€” but not what 'good' means. That gap is filled by a quality agreement (often called a QAA, for quality assurance agreement), which fixes the acceptance standard, the inspection rules and the consequences of failure. In Chinese law the quality agreement is not a formality: it plugs directly into the Civil Code's rules on inspection, notice and defect liability, which decide whether a defect claim survives at all.

The AQL table: make the standard numeric

A quality agreement should define acceptance with a concrete sampling standard, and the workhorse is AQL β€” Acceptable Quality Limit β€” under ISO 2859-1. A common and defensible starting point for consumer goods is General Inspection Level II with AQL values of Critical 0, Major 2.5 and Minor 4.0: no critical defect may pass, the major-defect rate is capped at 2.5%, and the minor-defect rate at 4%. Writing these numbers into the agreement removes the ambiguity that otherwise turns every dispute into an argument about what 'reasonable quality' means.

Inspection and notice under the Civil Code

The Civil Code of the People's Republic of China sets the default rules a quality agreement must fit into. Article 620 requires the buyer to inspect the goods within the agreed period or, if none was agreed, promptly. Article 621 requires the buyer to notify the seller of any non-conformity within a reasonable period, with a backstop: absent a quality guarantee period, the notice must come within two years of receipt, and beyond that the buyer is not entitled to claim the goods do not conform. Critically, if a quality guarantee period was agreed, that period overrides the two-year cap. Article 622 says an agreed inspection period controls. And Article 623 deems the goods accepted if the buyer fails to object within the relevant period. The practical consequence: without a written inspection-and-notice clause, a buyer can lose a valid defect claim by staying silent too long.

The golden sample

The Civil Code gives the sample legal weight. Under Articles 635 and 636, where the parties buy by sample, the sample is the standard for the goods, and where a defect in the sample is concealed and unknown to the buyer, the goods must still conform to the ordinary standard for the same kind of thing. A 'golden sample' β€” approved by both sides, signed, sealed and retained β€” is therefore one of the cheapest enforcement tools available. The agreement should record the sample, state that bulk production must conform to it, and provide for its custody.

Liquidated damages and the limitation period

Two more provisions carry the economics. Liquidated damages under Article 585 let the parties fix a sum or a formula for breach; a court may adjust it where it is disproportionate to the actual loss, and in practice Chinese courts often treat a penalty above roughly 30% of the actual loss as excessive β€” note this 30% figure is judicial practice, not a statutory rule, so it should be framed as such. Separately, the general limitation period is three years under Article 188, running from when the party knew or should have known of the breach. A quality agreement that shortens or lengthens the notice clock, and that fixes a proportionate liquidated-damages formula, does more for a buyer than pages of general wording.

The clauses to include

  1. The AQL standard: General Inspection Level II with Critical 0, Major 2.5, Minor 4.0 under ISO 2859-1, or a stricter table for your category.
  2. An inspection period and a notice period, in days, that fit Article 620–622, plus a quality guarantee period to override the two-year cap.
  3. The golden sample: identify it, state that bulk must conform to it, and fix who keeps it.
  4. Remedies for non-conformity: repair, replacement, price reduction, return, and a liquidated-damages formula under Article 585.
  5. A clause preserving the three-year limitation period and, where useful, governing law and dispute resolution.
πŸ’‘ πŸ’‘ The expensive mistake

Leaving inspection and notice to the Civil Code's defaults. The defaults look reasonable until a buyer realises its defect claim died for lack of a timely written notice, or was capped at two years because no quality guarantee period was agreed. A one-page QAA with AQL numbers and a notice period fixes this. Related reading: Incoterms for China Sourcing: EXW, FOB, CIF and DDP.

A quality agreement is where the real purchase happens: it is the document that turns 'good quality' into AQL numbers, an inspection clock, a golden sample and a remedy. For any order large enough to hurt if it goes wrong, it is not optional.

This guide is general information for overseas buyers and is not legal advice. For a specific transaction or dispute, consult a qualified lawyer licensed in the relevant jurisdiction.

Verify a supplier now

Run due diligence on a Chinese supplier before you pay.

Verify now
βš–οΈLawyerπŸ€–AI Expertβœ‰οΈEmailinfo@iflawyer.com